-
Double Diffusive Flows over a Stretching Sheet of Variable Thickness with or without Surface Mass Transfer
Author: Patil, P.M. and Roy, S. and Moitsheki, R.J. and Momoniat, E.
Journal: Heat Transfer - Asian Research
Volume: 46
Page: 1087-1103
DOI: 10.1002/htj.21261
Year: 2017
-
Non-similar solutions of mixed convection flow from an exponentially stretching surface
Author: Patil, P.M. and Latha, D.N. and Roy, S. and Momoniat, E.
Journal: Ain Shams Engineering Journal
Volume: 8
Page: 697-705
DOI: 10.1016/j.asej.2015.10.012
Year: 2017
-
Analysis of heatline based visualization for thermal management during mixed convection of hot/cold fluids within entrapped triangular cavities
Author: Biswal, P. and Roy, M. and Roy, S. and Basak, T.
Journal: Journal of the Taiwan Institute of Chemical Engineers
Volume: 77
Page: 122-141
DOI: 10.1016/j.jtice.2017.04.032
Year: 2017
-
Role of moving horizontal walls on entropy generation during mixed convection within entrapped triangular cavities
-
Role of various moving walls on entropy generation during mixed convection within entrapped porous triangular cavities
Author: Roy, M. and Biswal, P. and Roy, S. and Basak, T.
Journal: Numerical Heat Transfer; Part A: Applications
Volume: 71
Page: 423-447
DOI: 10.1080/10407782.2016.1277927
Year: 2017
-
Heat flow visualization during mixed convection within entrapped porous triangular cavities with moving horizontal walls via heatline analysis
-
Unsteady mixed convection over an exponentially decreasing external flow velocity
-
Influence of mixed convection in an exponentially decreasing external flow velocity
-
Analysis of entropy generation during mixed convection in porous square cavities: Effect of thermal boundary conditions
-
Analysis of entropy generation on mixed convection in square enclosures for various horizontal or vertical moving wall(s)
-
Analysis of entropy generation for mixed convection in a square cavity for various thermal boundary conditions
Author: Roy, M. and Basak, T. and Roy, S. and Pop, I.
Journal: Numerical Heat Transfer; Part A: Applications
Volume: 68
Page: 44-74
DOI: 10.1080/10407782.2014.955352
Year: 2015
-
Role of various moving walls on energy transfer rates via heat flow visualization during mixed convection in square cavities
-
Heatlines and thermal management analysis for natural convection within inclined porous square cavities
-
Role of entropy generation on thermal management during natural convection in tilted porous square cavities
Author: Singh, A.K. and Basak, T. and Nag, A. and Roy, S.
Journal: Journal of the Taiwan Institute of Chemical Engineers
Volume: 50
Page: 153-172
DOI: 10.1016/j.jtice.2014.12.026
Year: 2015
-
Role of entropy generation on thermal management during natural convection in a tilted square cavity with isothermal and non-isothermal hot walls
Author: Singh, A.K. and Roy, S. and Basak, T. and Momoniat, E.
Journal: Numerical Heat Transfer; Part A: Applications
Volume: 66
Page: 1243-1267
DOI: 10.1080/10407782.2014.892402
Year: 2014
-
Finite element simulations on heat flow visualization and entropy generation during natural convection in inclined square cavities
-
Influence of convective boundary condition on double diffusive mixed convection from a permeable vertical surface
-
Numerical study on entropy generation for mixed convection in square enclosures for isothermally and non-isothermally hot bottom wall
Author: Roy, S. and Roy, M. and Basak, T.
Journal: Proceedings of the 15th International Heat Transfer Conference, IHTC 2014
Year: 2014
-
Analysis of thermal efficiency via analysis of heat flow and entropy generation during natural convection within porous trapezoidal cavities
-
Role of entropy generation on thermal management due to thermal convection in porous trapezoidal enclosures with isothermal and non-isothermal heating of wall
-
Analysis of heatlines and entropy generation during free convection within trapezoidal cavities
-
Finite element simulation with heatlines and entropy generation minimization during natural convection within porous tilted square cavities
Author: Basak, T. and Singh, A.K. and Richard, R. and Roy, S.
Journal: Industrial and Engineering Chemistry Research
Volume: 52
Page: 8046-8061
DOI: 10.1021/ie4005755
Year: 2013
-
Unsteady thermal radiation mixed convection flow from a moving vertical plate in a parallel free stream: Effect of Newtonian heating
-
Chemical reaction effects on unsteady mixed convection boundary layer flow past a permeable slender vertical cylinder due to a nonlinearly stretching velocity
-
Analysis of heatlines during natural convection within porous square enclosures: Effects of thermal aspect ratio and thermal boundary conditions
-
Heatlines for visualization of heat transport for natural convection within porous trapezoidal enclosures with various wall heating
Author: Ramakrishna, D. and Basak, T. and Roy, S.
Journal: Numerical Heat Transfer; Part A: Applications
Volume: 63
Page: 347-372
DOI: 10.1080/10407782.2013.733635
Year: 2013
-
A comprehensive Bejan's heatline approach for natural convection heat transfer within inclined square cavities
Author: Singh, A.K. and Roy, S. and Basak, T.
Journal: ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012
Volume: 1
Page: 1067-1076
DOI: 10.1115/HT2012-58226
Year: 2012
-
Analysis of entropy generation due to natural convection in tilted square cavities
Author: Kumar Singh, A. and Roy, S. and Basak, T.
Journal: Industrial and Engineering Chemistry Research
Volume: 51
Page: 13300-13318
DOI: 10.1021/ie3013665
Year: 2012
-
Numerical study of mixed convection within porous square cavities using Bejan's heatlines: Effects of thermal aspect ratio and thermal boundary conditions
-
A complete heatline analysis on mixed convection within a square cavity: Effects of thermal boundary conditions via thermal aspect ratio
-
Flow and heat transfer over a moving vertical plate in a parallel free stream: Role of internal heat generation or absorption
-
Unsteady heat and mass transfer over a vertical stretching sheet in a parallel free stream with variable wall temperature and concentration
Author: Patil, P.M. and Pop, I. and Roy, S.
Journal: Numerical Methods for Partial Differential Equations
Volume: 28
Page: 926-941
DOI: 10.1002/num.20665
Year: 2012
-
A Peclet number based analysis of mixed convection for lid-driven porous square cavities with various heating of bottom wall
-
Analysis of Bejan's heatlines on visualization of heat flow and thermal mixing in tilted square cavities
-
Unsteady effects on mixed convection boundary layer flow from a permeable slender cylinder due to non-linearly power law stretching
-
Visualization of heat transport during natural convection in a tilted square cavity: Effect of isothermal and nonisothermal heating
Author: Singh, A.K. and Roy, S. and Basak, T.
Journal: Numerical Heat Transfer; Part A: Applications
Volume: 61
Page: 417-441
DOI: 10.1080/10407782.2012.654678
Year: 2012
-
Analysis of entropy generation minimization during natural convection in trapezoidal enclosures of various angles with linearly heated side wall(S)
Author: Basak, T. and Kumar, P. and Anandalakshmi, R. and Roy, S.
Journal: Industrial and Engineering Chemistry Research
Volume: 51
Page: 4069-4089
DOI: 10.1021/ie201107f
Year: 2012
-
Effects of chemical reaction on mixed convection flow of a polar fluid through a porous medium in the presence of internal heat generation
-
Entropy generation vs energy flow due to natural convection in a trapezoidal cavity with isothermal and non-isothermal hot bottom wall
-
Analysis of heat recovery and heat transfer within entrapped porous triangular cavities via heatline approach
-
Heatline analysis of heat recovery and thermal transport in materials confined within triangular cavities
-
Unsteady mixed convection flow from a moving vertical plate in a parallel free stream: Influence of heat generation or absorption
-
Unsteady mixed convection flow over a vertical stretching sheet in a parallel free stream with variable wall temperature
-
Heatline approach for visualization of heat flow and efficient thermal mixing with discrete heat sources
-
Analysis of mixed convection in a lid-driven porous square cavity with linearly heated side wall(s)
-
The influence of slot injection/suction on the spreading of a thin film under gravity and surface tension
-
Visualization of heat transport due to natural convection for hot materials confined within two entrapped porous triangular cavities via heatline concept
-
Role of thermally stratified medium on a free convection flow from a rotating sphere
Author: Saikrishnan, P. and Roy, S. and Takhar, H.S. and Ravindran, R.
Journal: International Journal of Numerical Methods for Heat and Fluid Flow
Volume: 20
Page: 96-110
DOI: 10.1108/09615531011008145
Year: 2010
-
Mixed convection flow over a vertical power-law stretching sheet
Author: Patil, P.M. and Roy, S. and Chamkha, A.J.
Journal: International Journal of Numerical Methods for Heat and Fluid Flow
Volume: 20
Page: 445-458
DOI: 10.1108/09615531011035839
Year: 2010
-
Visualization of heat transport during natural convection within porous triangular cavities via heatline approach
Author: Basak, T. and Roy, S. and Ramakrishna, D. and Pop, I.
Journal: Numerical Heat Transfer; Part A: Applications
Volume: 57
Page: 431-452
DOI: 10.1080/10407780903507866
Year: 2010
-
Effects of injection (suction) on a steady mixed convection boundary layer flow over a vertical cone
Author: Ravindran, R. and Roy, S. and Momoniat, E.
Journal: International Journal of Numerical Methods for Heat and Fluid Flow
Volume: 19
Page: 432-444
DOI: 10.1108/09615530910938362
Year: 2009
-
Natural convection flows in porous trapezoidal enclosures with various inclination angles
-
Finite element simulation of natural convection within porous trapezoidal enclosures for various inclination angles: Effect of various wall heating
-
Natural convection flow simulation for various angles in a trapezoidal enclosure with linearly heated side wall(s)
-
Double diffusive mixed convection flow over a moving vertical plate in the presence of internal heat generation and a chemical reaction
Author: Patil, P.M. and Roy, S. and Chamkha, A.J.
Journal: Turkish Journal of Engineering and Environmental Sciences
Volume: 33
Page: 193-205
DOI: 10.3906/muh-0905-21
Year: 2009
-
Influence of double slot suction (injection) into water boundary layer flows over sphere
-
Role of non-uniform slot injection (suction) model on the separation of a laminar boundary layer flow
Author: Roy, S. and Saikrishnan, P. and Ravindran, R.
Journal: Mathematical and Computer Modelling
Volume: 50
Page: 45-52
DOI: 10.1016/j.mcm.2008.12.016
Year: 2009
-
Heat flow analysis for natural convection within trapezoidal enclosures based on heatline concept
-
Visualization of heat flow due to natural convection within triangular cavities using Bejan's heatline concept
-
Analysis of mixed convection flows within a square cavity with uniform and non-uniform heating of bottom wall
-
Analysis of heat recovery and thermal transport within entrapped fluid based on heatline approach
-
Analysis of mixed convection flows within a square cavity with linearly heated side wall(s)
-
Non-uniform double slot suction (injection) into water boundary layer flows over a cylinder
-
Unsteady mixed convection flow over a vertical wedge
-
Finite element simulation of natural convection flow in a trapezoidal enclosure filled with porous medium due to uniform and non-uniform heating
-
Bejan's Heatlines and Numerical Visualization of Heat Flow and Thermal Mixing in Various Differentially Heated Porous Square Cavities
Author: Kaluri, R.S. and Basak, T. and Roy, S.
Journal: Numerical Heat Transfer; Part A: Applications
Volume: 55
Page: 487-516
DOI: 10.1080/10407780902776348
Year: 2009
-
Analysis of steady convective heating for molten materials processing within trapezoidal enclosures
Author: Basak, T. and Roy, S. and Natarajan, E.
Journal: Industrial and Engineering Chemistry Research
Volume: 47
Page: 8652-8666
DOI: 10.1021/ie800263c
Year: 2008
-
Finite element analysis of natural convection flow in a isosceles triangular enclosure due to uniform and non-uniform heating at the side walls
-
Role of 'Bejan's heatlines' in heat flow visualization and optimal thermal mixing for differentially heated square enclosures
-
Natural convection and flow simulation in differentially heated isosceles triangular enclosures filled with porous medium
Author: Basak, T. and Roy, S. and Krishna Babu, S.
Journal: Chemical Engineering Science
Volume: 63
Page: 3328-3340
DOI: 10.1016/j.ces.2008.03.038
Year: 2008
-
Finite element simulations of natural convection flow in an isosceles triangular enclosure filled with a porous medium: Effects of various thermal boundary conditions
-
Finite element simulations of natural convection in a right-angle triangular enclosure filled with a porous medium: Effects of various thermal boundary conditions
-
Unsteady mixed convection from a rotating vertical slender cylinder in an axial flow
-
Finite element simulation on natural convection flow in a triangular enclosure due to uniform and nonuniform bottom heating
Author: Roy, S. and Basak, T. and Thirumalesha, Ch. and Krishna, Ch.M.
Journal: Journal of Heat Transfer
Volume: 130
DOI: 10.1115/1.2804934
Year: 2008
-
Mixed convection along a rotating vertical slender cylinder in an axial flow
-
Multiple slot suction/injection into an exponentially decreasing free stream flow
-
Natural convection flows in a trapezoidal enclosure with uniform and non-uniform heating of bottom wall
-
Numerical investigation of unsteady mixed convection flow
Author: Singh, P.J. and Roy, S.
Journal: 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007
Volume: 1
Page: 361-367
DOI: 10.1115/HT2007-32207
Year: 2007
-
Effect of various thermal boundary conditions on natural convection in a trapezoidal cavity with linearly heated side wall(s)
Author: Natarajan, E. and Roy, S. and Basak, T.
Journal: Numerical Heat Transfer, Part B: Fundamentals
Volume: 52
Page: 533-550
DOI: 10.1080/10407790701563623
Year: 2007
-
Effect of the temperature difference aspect ratio on natural convection in a square cavity for nonuniform thermal boundary conditions
Author: Sathiyamoorthy, M. and Basak, T. and Roy, S.J. and Mahanti, N.C.
Journal: Journal of Heat Transfer
Volume: 129
Page: 1723-1728
DOI: 10.1115/1.2768099
Year: 2007
-
Natural convection in a trapezoidal cavity with linearly heated side wall(S)
Author: Natarajan, E. and Basak, T. and Roy, S
Journal: 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007
Volume: 1
Page: 1021-1030
DOI: 10.1115/HT2007-32180
Year: 2007
-
Non-uniform double slot injection (suction) on a forced flow over a slender cylinder
-
Steady natural convection flow in a square cavity filled with a porous medium for linearly heated side wall(s)
-
Finite element analysis of natural convection in a triangular enclosure: Effects of various thermal boundary conditions
Author: Basak, T. and Roy, S. and Thirumalesha, Ch.
Journal: Chemical Engineering Science
Volume: 62
Page: 2623-2640
DOI: 10.1016/j.ces.2007.01.053
Year: 2007
-
Unsteady mixed convection flow over a vertical cone due to impulsive motion
-
Steady natural convection flows in a square cavity with linearly heated side wall(s)
-
Non-similar solution of an unsteady mixed convection flow over a vertical cone with suction or injection
-
Effects of nonuniformly heated wall(S) on a natural-convection flow in a square cavity filled with a porous medium
Author: Basak, T. and Roy, S. and Takhar, H.S.
Journal: Numerical Heat Transfer; Part A: Applications
Volume: 51
Page: 959-978
DOI: 10.1080/10407790601128600
Year: 2007
-
Effects of thermal boundary conditions on natural convection flows within a square cavity
-
Effect of non-uniform slot injection (suction) on a forced flow over a slender cylinder
-
Unsteady mixed convection from a moving vertical slender cylinder
Author: Roy, S.J. and Anilkumar, D.
Journal: Journal of Heat Transfer
Volume: 128
Page: 368-373
DOI: 10.1115/1.2165206
Year: 2006
-
Natural convection in a square cavity filled with a porous medium: Effects of various thermal boundary conditions
-
Nonsimilar solution of an unsteady mixed convection flow on a moving slender cylinder
Author: Anilkumar, D. and Roy, S.
Journal: 3rd M.I.T. Conference on Computational Fluid and Solid Mechanics
Page: 566-571
DOI:
Year: 2005
-
Natural convection inside a square cavity heated from below and symmetrically cooled at both sides: Effects of various dirichlet boundary conditions at the bottom wall
Author: Roy, S. and Basak, T.
Journal: Proceedings of the ASME Summer Heat Transfer Conference
Volume: 1
Page: 555-563
DOI: 10.1115/HT2005-72353
Year: 2005
-
Finite element analysis of natural convection flows in a square cavity with non-uniformly heated wall(s)
-
Non-uniform slot injection (suction) into water boundary layer flow past yawed cylinder
-
Unsteady mixed convection flow on a rotating cone in a rotating fluid
-
Unsteady MHD flow on a rotating cone in a rotating fluid
-
Self-similar solution of the unsteady mixed convection flow in the stagnation point region of a rotating sphere
Author: Anilkumar, D. and Roy, S.
Journal: Heat and Mass Transfer/Waerme- und Stoffuebertragung
Volume: 40
Page: 487-493
DOI: 10.1007/s00231-003-0447-7
Year: 2004
-
Unsteady mixed convection from a rotating cone in a rotating fluid due to the combined effects of thermal and mass diffusion
-
Unsteady free convection flow over an infinite vertical porous plate due to the combined effects of thermal and mass diffusion, magnetic field and Hall currents
Author: Takhar, H.S. and Roy, S. and Nath, G.
Journal: Heat and Mass Transfer/Waerme- und Stoffuebertragung
Volume: 39
Page: 825-834
DOI: 10.1007/s00231-003-0427-y
Year: 2003
-
Double diffusive mixed convection flow from a vertical exponentially stretching surface in presence of the viscous dissipation
-
Analysis of entropy generation for mixed convection within porous square cavities: Effects of various moving walls
-
Thermal diffusion and diffusion-thermo effects on mixed convection from an exponentially impermeable stretching surface
-
Finite element simulations on heatline trajectories for mixed convection in porous square enclosures: Effects of various moving walls
-
Non-darcy buoyancy flowin a square cavity filled with porous medium for various temperature difference aspect ratios
-
A comprehensive heatline based approach for natural convection flows in trapezoidal enclosures: Effect of various walls heating
Author: Basak, T. and Ramakrishna, D. and Roy, S. and Matta, A. and Pop, I.
Journal: International Journal of Thermal Sciences
Volume: 50
Page: 1385-1404
DOI: 10.1016/j.ijthermalsci.2011.03.006
Year: 2011
-
A complete heatline analysis on visualization of heat flow and thermal mixing during mixed convection in a square cavity with various wall heating
Author: Basak, T. and Pradeep, P.V.K. and Roy, S.
Journal: Industrial and Engineering Chemistry Research
Volume: 50
Page: 7608-7630
DOI: 10.1021/ie102530u
Year: 2011
-
Finite element based heatline approach to study mixed convection in a porous square cavity with various wall thermal boundary conditions
-
Analysis of heatlines for natural convection within porous trapezoidal enclosures: Effect of uniform and non-uniform heating of bottom wall
-
Non-uniform slot injection (suction) into water boundary layers over (i) a cylinder and (ii) a sphere
-
Non-uniform slot injection (suction) into steady laminar water boundary layer flow over a rotating sphere
Personal Link
